Lot-sizing for production planning in a recovery system with returns
Zouadi, Tarik1 ; Yalaoui, Alice2 ; Reghioui, Mohamed1 ; El Kadiri, Kamal Eddin1
1 National School of Applied Sciences of Tetouan Mhannech II, BP 2121 Tetouan, Morocco.
2 LOSI (UMR CNRS ICD 6281), University of Technology of Troyes, 12 Rue Marie Curie CS 42060, 10004 Troyes Cedex, France.
RAIRO - Operations Research - Recherche Opérationnelle, Special ROADEF 2013, Tome 49 (2015) no. 1, pp. 123-142.

This paper deals with the production planning and control problem of a single product involving combined manufacturing and remanufacturing operations. We investigate here a lot-sizing problem in which the demand for items can be satisfied by both the new and the remanufactured products. We assume that produced and recovered items are of the same quality. Two types of inventories are involved in this problem. The produced items are stored in the first inventory. The returned products are collected in the second inventory and then remanufactured. The objective of this study is to propose a manufacturing/remanufacturing policy that would minimize the holding, the set up and preparation costs. The decision variables are the manufacturing and the remanufacturing rates. The paper proposes an extension of the reverse Wagner/Whitin dynamic production planning and inventory control model, a Memetic Algorithm (MA) and a Hybrid Algorithm (HA). The HA was improved with a post-optimization procedure using Path Relinking. Numerical experiments were conducted on a set of 300 instances with up to 48 periods. The results show that both methods give high-quality solutions in moderate computational time.

DOI : 10.1051/ro/2014044
Classification : 90B30, 90C27, 90C59
Mots-clés : Lot-sizing, remanufacturing, genetic algorithm, GRASP, path relinking
Zouadi, Tarik 1 ; Yalaoui, Alice 2 ; Reghioui, Mohamed 1 ; El Kadiri, Kamal Eddin 1

1 National School of Applied Sciences of Tetouan Mhannech II, BP 2121 Tetouan, Morocco.
2 LOSI (UMR CNRS ICD 6281), University of Technology of Troyes, 12 Rue Marie Curie CS 42060, 10004 Troyes Cedex, France. 
@article{RO_2015__49_1_123_0,
     author = {Zouadi, Tarik and Yalaoui, Alice and Reghioui, Mohamed and El Kadiri, Kamal Eddin},
     title = {Lot-sizing for production planning in a recovery system with returns},
     journal = {RAIRO - Operations Research - Recherche Op\'erationnelle},
     pages = {123--142},
     publisher = {EDP-Sciences},
     volume = {49},
     number = {1},
     year = {2015},
     doi = {10.1051/ro/2014044},
     mrnumber = {3349120},
     zbl = {1310.90040},
     language = {en},
     url = {http://archive.numdam.org/articles/10.1051/ro/2014044/}
}
TY  - JOUR
AU  - Zouadi, Tarik
AU  - Yalaoui, Alice
AU  - Reghioui, Mohamed
AU  - El Kadiri, Kamal Eddin
TI  - Lot-sizing for production planning in a recovery system with returns
JO  - RAIRO - Operations Research - Recherche Opérationnelle
PY  - 2015
SP  - 123
EP  - 142
VL  - 49
IS  - 1
PB  - EDP-Sciences
UR  - http://archive.numdam.org/articles/10.1051/ro/2014044/
DO  - 10.1051/ro/2014044
LA  - en
ID  - RO_2015__49_1_123_0
ER  - 
%0 Journal Article
%A Zouadi, Tarik
%A Yalaoui, Alice
%A Reghioui, Mohamed
%A El Kadiri, Kamal Eddin
%T Lot-sizing for production planning in a recovery system with returns
%J RAIRO - Operations Research - Recherche Opérationnelle
%D 2015
%P 123-142
%V 49
%N 1
%I EDP-Sciences
%U http://archive.numdam.org/articles/10.1051/ro/2014044/
%R 10.1051/ro/2014044
%G en
%F RO_2015__49_1_123_0
Zouadi, Tarik; Yalaoui, Alice; Reghioui, Mohamed; El Kadiri, Kamal Eddin. Lot-sizing for production planning in a recovery system with returns. RAIRO - Operations Research - Recherche Opérationnelle, Special ROADEF 2013, Tome 49 (2015) no. 1, pp. 123-142. doi : 10.1051/ro/2014044. http://archive.numdam.org/articles/10.1051/ro/2014044/

N. Absi and S. Kedad-Sidhoum, MIP-based heuristics for multi-item capacitated lot-sizing problem with setup times and shortage costs. RAIRO–Oper. Res. 41 (2007) 171–192. | DOI | Numdam | MR | Zbl

N. Absi, S. Dauzère-Pérès, S. Kedad-Sidhoum, B. Penz and C. Rapine, Lot sizing with carbon emission constraints. Eur. J. Oper. Res. 227 (2013) 55-61. | DOI | MR | Zbl

N. Absi, S. Kedad-Sidhoum and S. Dauzère-Pérès, Uncapacitated lot-sizing problem with production time windows, early productions, backlogs and lost sales, Int. J. Prod. Res. Special Issue: Lot sizing and scheduling: new models and solution approaches to address industrial extensions 49 (2011) 2551–2566. | DOI | Zbl

C. Almeder, A hybrid optimization approach for multi-level capacitated lot-sizing problems. Eur. J. Oper. Res. 200 (2010) 599–606. | DOI | Zbl

J. Boissière, Y. Frein and C. Rapine, Lot-sizing in a serial distribution system with capacitated in-system production flow. Int. J. Prod. Econ. 112 (2008) 483–494. | DOI

N. Brahimi, S. Dauzere-Peres, N.M. Najid and A. Nordli, Single item lot sizing problems. Eur. J. Oper. Res. 168 (2006) 1–16. | DOI | MR | Zbl

M.P. De Brito, R. Dekker and S.D.P. Flapper, Reverse logistics: A review of case studies. Lecture Notes in Economics and Mathematical Systems 544 (2005) 243–281. | DOI | Zbl

S. Fernandes and H.R. Lourenço, Hybrids combining local search heuristics with exact algorithms, in Proceeding of the V Congreso Español sobre Metaheurísticas. Algoritmos Evolutivos y Bioinspirados, MAEB’2007, February 14-16 (2007) 269–274.

M. Fleischmann, B. Gräve and J.A.E.E. Van Nunen, Integrating Closed-Loop Supply Chains and Spare-Parts Management at IBM. Interfaces 33 (2003) 44–56. | DOI

L. Flindt Muller, S. Spoorendonk and D. Pisinger, A hybrid adaptive large neighborhood search heuristic for lot-sizing with setup times. Eur. J. Oper Res. 218 (2012) 614–623. | DOI | MR | Zbl

G.H. Goren and S. Tunali, R. Jans. A review of applications of genetic algorithms in lot sizing. J. Intelligent Manufacturing 21 (2010) 575–590. | DOI

V.D.R. Jr. Guide, Production planning and control for remanufacturing: Industry practice and research needs. J. Oper. Manag. 18 (2000) 467–483. | DOI

J. Hanafi, S. Kara and H. Kaebernick, Reverse logistics strategies for end-of-life products. Int. J. Logistics Manage. 19 (2008) 367–388. | DOI

P. Hasanov, M.Y. Jaber and S. Zolfaghari, production, remanufacturing and waste disposal models for the cases of pure and partial backordering. Appl. Math. Model. 36 (2012) 5249–5261. | DOI | MR | Zbl

M.L. Junior and M.G. Filho, Production planning and control for remanufacturing: literature review and analysis. Production planning & control. Manage. Oper. 23 (2012) 419–435.

I. Konstantaras, K. Skouri and M.Y. Jaber, Lot sizing for a recoverable product with inspection and sorting. Comput. Indust. Eng. 58 (2010) 452–462. | DOI

H.R. Krikke, H.M. Le Blanc and S. Van De Velde, The impact of product life cycle management on circular supply chains - and reverse. Icfaian J. Manage. Res. 3 (2004) 7–31.

N. Labadi, C. Prins and M. Reghioui, A memetic algorithm for the vehicle routing problem with time windows. RAIRO–Oper. Res. 42 (2008) 415–431. | DOI | Numdam | MR | Zbl

L. Lu and X. Qi, Dynamic lot sizing for multiple products with a new joint replenishment model. Eur. J. Oper. Res. 212 (2011) 74–80. | DOI | MR | Zbl

L. Marti and R. Marti, GRASP and Path Relinking for 2-Layer Straight Line Crossing Minimization. INFORMS J. Comput. 11 (1999) 44–52. | DOI | Zbl

R. Martí, M.G.C. Resende and C.C. Ribeiro, Special issue of Computers and Operations Research: GRASP with Path Relinking, Developments and applications. Comput. Oper. Res. 40 (2013) 3080. | DOI

G. Massonnet, J.-P. Gayon, C. Rapine, Approximation algorithms for deterministic continuous-review inventory lot-sizing problems with time-varying demand. Eur. J. Oper. Res. 234 (2014) 641–649. | DOI | MR | Zbl

M.C.V. Nascimento, M.G.C. Resende and F.M.B. Toledo, GRASP heuristic with path-relinking for the multi-plant capacitated lot sizing problem. Eur. J. Oper. Res. 200 (2010) 747–754. | DOI | Zbl

F. Neri and C. Cotta, Memetic algorithms and memetic computing optimization: A literature review. Swarm and Evolutionary Computation 2 (2012) 114. | DOI

P. Pineyro and O. Viera, The economic lot-sizing problem with remanufacturing and one-way substitution. Int. J. Prod. Econ. 124 (2012) 482–488. | DOI

J. Puchinger and G.R. Raidl, Combining metaheuristics and exact algorithms in combinatorial optimization: survey and classification, in Proceedings of the first international work-conference on the interplay between Natural and artificial computation, edited by J. Mira and J.R. Alvarez, vol. 3562 (2005) 41–53.

J. Raf and D. Zeger, Meta-Heuristics for Dynamic Lot Sizing: A Review and Comparison of Solution Approaches (24 (2004) 6,). ERIM Report Series Reference No. ERS-2004-042-LIS. J. Oper. Res. 234 (2014) 641–649.

M.G.C. Resende and C.C. Ribeiro, A GRASP with path-relinking for private virtual circuit routing. Networks 41 (2003) 104–114. | DOI | MR | Zbl

D.S. Rogers and R.S. Tibben-Lembke, Going backwards: reverse logistics trends and practices. University of Nevada. Reno Center for Logistics Management. Reverse Logistics Executive Council (1998) 101–115.

T. Schulz, A new Silver-Meal based heuristic for the single-item dynamic lot sizing problem with returns and remanufacturing. Int. J. Prod. Res. 49 (2011) 2519–2533. | DOI

T. Schulz and G. Voigt, A flexibly structured lot sizing heuristic for a static remanufacturing system. Omega 44 (2014) 21–31. | DOI

E. Suwondo and H. Yuliando, Dynamic lot-sizing problems: A Review on Model and Efficient Algorithm. Agroindust. J. 1 (2012) 36–49. | DOI

R.H. Teunter, Z.P. Bayindir and W. Van Den Heuvel, Dynamic lot sizing with product returns and remanufacturing. Int. J. Prod. Res. 44 (2006) 4377–4400. | DOI | Zbl

N. Wang, Z. He, J. Sun, H. Xie and W. Shi, A single-item incapacitated lot-sizing problem with remanufacturing and outsourcing. Procedia Engineer. (2011) 5170–5178.

T. Wu and L. Shi, Mathematical models for capacitated multi-level production planning problems with linked lot sizes. Int. J. Prod. Res. 49 (2011) 6227–6247. | DOI

Cité par Sources :